Cement & Concrete Testing Equipments

Product Details:

Having years of experience in this domain, we are capable of providing our customers with Vibrating Tables. All our products are available in various sizes, shapes and designs at market leading prices at industry leading prices to meet the specific requirement of our customers. Moreover, our products are widely used for compacting concrete cubes and cylinders and are known for their longer service life, accuracy and sturdy construction.

Features:-

• The apparatus consists of a motor fitted with a variable pitch pulley housed in a cabinet
• The vibrations are imparted by means of off-balance masses rotating on a shaft of a vibrator clamped to the underside of the table top
• The table top is 50 cm x 50 cm and has stops along its edges to prevent moulds from walking off the table during vibration
• A cross arm adjustable on a vertical rod at the center of the table is provided to hold the moulds while operating the table
• The variable pitch pulley arrangement permits the frequency to be varied steplessly between a maximum of 3600 vibrations per minute
• A speed regulation handle is provided for increasing or decreasing the frequency

Product Details:

We are manufacturers, suppliers and exporter of Vibratory Hammer for Cube Moulds from India, Maharashtra, Mumbai. Vibratory Hammer is a specialized equipment used consistently at construction sites. The Vibratory Hammer is electrically operated.

Uses:

• Used for changing the soil formation with the use of its vibration.
• Used for driving hammers into heavy or hard piles.
• Used for the compaction of concrete cubes of 150mm & 100mm.

Specifications:

• Color: as per the customer''s requirement
• Place of Origin: Shandong China (Mainland)

 

Product Details:

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer),D/P

Product Details:

We are actively engaged in offering a qualitative range of Automatic Digital Compression Testing Machine for catering the diversified requirements of our clients.

Features :

• High stability four column load frame
• Each frame tested for stability and alignment to avoid tension failure during a test and to ensure center loading
• Standard Platens for 3 X 6"/ 4 X 8" and 6 X 12" cylinders included.
• A precise large diameter spherical upper platen for optimum results
• Variety of optional accessories for cubes, blocks, bricks and flexure test available
• Motorized hydraulic power pack or pumping unit with rapid approach and automatic over load protection
• Comes standard with safety Guards on all four sides.

 

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer),D/P,D/A

Product Details:

Tile Abrasion Testing Machine is used for determination of resistance to wear for cement concrete flooring tiles. Tiles specimen of size 7.06 cm x 7.06 cm is pressed tace-wise under specific load on a grinding path and abrasive powder is evenly spread on the rotating grinding path and after specific number of revolution of the grinding disc the second parallel side of the tile is subjected to wear for similar number of rotations. The wear of the tile is measured on a thickness gauge specifically made for the purpose. the machine consists of a disc rotating at a speed of 30 rpm in a circular tray. A bracket is provided to hold the specimen. A counter balance lever loads the specimen. Load applied is 30 kgf. A funnel is fitted to evenly spread abrasive powder on the grinding path. A pre-set counter automatically stops the machine after 22 revolutions. This counter is re-adjustable. The machine works on 440 volts A. C., three phase electrical supply.

Product Details:

With the help of our state-of-the-art infrastructure unit, we are able to manufacture and supply Cube Testing Machine. The offered testing machine is manufactured by making use of high grade material and leading technology in compliance with the set norms of industry. We offer this testing machine on number of specifications as per the variegated needs of customers. Our offered testing machine is packed with quality material to enhance its life.

Features:

• Perfect reading
• Portable
• Easy to use

Specifications:

• Max. test force: 2000 KN
• Force range: 200~2000 KN
• Testing space: 240 × 240 × 80~450 mm
• Piston max. stroke: 50 mm
• Readout accuracy: ≤±1%
• Motor power: 0.75 kW 380V
• Machine size: 850 × 500 × 1480 mm
• Net weight: 800 Kg

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer),D/P,D/A

Product Details:

Having years of experience in this field, we are capable of providing our customers with Beam Molds. Procured from the reliable manufacturers of the market, our products are made of supreme quality metal that is why these are strong enough to resist distortion. Even under the adverse environment conditions, our products retain their shape and size. Moreover, all our products are available in different sizes for cube, beam & cylindrical moulding that are needed for compressive strength testing.

Product Details:

Being a well established-organization, we are engaged in manufacturing and supplying Electric Cube Testing Machine Dual Gauges. Our offered gauges are manufactured utilizing finest quality material and advanced technology following the standards of industry. The gauges offered by us are ideal for concrete, cement, tube, brick compression and flexural test. We are giving these gauges from us on diverse specifications.

Features:

• Innovative design
• Compact size
• Light weight

Other Details:

• High performance load frame
• Speed adjusting range
• Digital display of load
• Suitable for concrete, cement, tube, brick compression and flexural test

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer),D/P,D/A

Product Details:

With an aim to stand tall on the expectations of our esteemed clients, we are providing Compression Testing Machine. Our offered testing machines are manufactured utilizing finest quality material and advanced technology following the standards of industry. The testing machines offered by us are an electric cum hand operated for compression tests on concrete specimens up to 20cm dia and 30 cm in height. We are giving these testing machines from us on diverse specifications.

Features:

• Compact design
• Rust free
• User friendly

 

 

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer),D/P

Product Details:

The load frame is made up of high quality steel construction with a fixed. Upper lead carrying a ball seated platen. 4 pillars are fixed to the base and the top plate of the loading frame. The upper and lower plates are adjusted with the help of head screw on either side of the pillar. The ram dia of the machine varies from the requirements of the customer. The lower pattern are at the base of the frame above the ram and it is rectangular in shape. Sufficient clearance is provided between the platens to fit in the cylindrical/ cube moulds. Spacer provided to adjust cubes and cylinders. A 20 cm dia pressure gauge with maximum load induction pointer is fitted on the top panel and in turn is connected to the hydraulic pressure pipe. On the right hand a console is fitted within which the electrical motor is fitted along with its coupling which inturn is connected to the pumping unit. A slow / fast loading rate regulator fixed on the top of the console for adjusting the rate of loading. The machine is duly calibrated and passed after inspecting and analyzing it with a compression level indicator is provided as a dip stick. 

Optional:

• Extra gauges can be attached to the machine (max. 3 nos. ), for better accuracy and results.
• Rectangular plates of various sizes on request.
• Digital Load Indicator with pressure transducer can be supplied at an extra cost.

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer),D/P

Product Details:

Under the strict guidance of seasoned professionals, we are manufacturing and supplying Aggregate Crushing Value Apparatus. Our offered apparatus are manufactured utilizing finest quality material and advanced technology following the standards of industry. The apparatus offered by us are checked in terms of quality before delivering at customer’s end. We are giving these apparatus from us on diverse specifications.

 

Features:

 

• Superior performance
• Robust construction
• High durability

 

Specifications:

 

• M.S. Cylindrical container 150 mm ±0.5 mm dia x 130 mm to 140 mm
• High with base plate 200 to 230 mm. sqr x 6mm thick
• A plinger of 148mm ± 0.5mm dia x 100 to 115 mm high
• Supplied complete with tamping rod, 16mm dia x 600mm long
• And 1 No. Metal measure 115 ± 0.5 mm dia x 180 0.5 mm high

Product Details:

These are available in different sizes and are made according to Indian and British standards. For the metric size cube molds, the faces are machined flat to 0.02mm accuracy and finished to within 0.02mm. For the inch size molds, the faces are machined flat to 0.01 inches and finished to within 0.01 in. All molds are supplied complete with base plate.

 

Specifications:

• Mold Cast iron, for 50mm, Cube
• Mold gunmetal, for 50mm, Cube
• Mold steel for 7.06cms cube with loose base plate.
• Mold Cast iron for 7.06cms cube with loose base plate.
• Mold Cast iron, for 10cm cube 153 with "ISI" mark.
• Mold Cast iron, for 15cm cube 155 with "ISI" mark.
• Mold Cast iron, for 20cm cube
• Mold Cast iron, for 30cm cube

Product Details:

We offer the customers Slump Test Apparatus, which is designed in order to figure out the slump of fresh concrete mix. It comprises of a base plate and a tamping rod. It also consists of a slump cone that is fitted with handles. This easy handling of the apparatus has made it appreciable amidst our customers.

The offered apparatus has the following features:

• Highly reliable
• Operator friendly
• Accurate results

Applications :

 

• Laboratories

• Civil engineering

• Constructions

 

Nominal size : 38mm

 

It comprises the following :

 

• A tamping rod 1. 6 cm dia and 60 cm long with one end rounded and graduated from 0 to 15 cm. In 0. 5 cm spacing to measure the slump.

• A base plate with clamping arrangement for the slump cone and a swivel handle which also serves as the datum for measuring the slump

• A slump cone 100 mm dia at the top, 200mm dia at the bottom and 300 mm high

Product Details:

Specifications:

• Loading accuracy as high as ± 1%
• Straining at variable speeds to suit a wide range of materials
• Motor-driven threaded columns for quick and convenient adjustment of lower
• cross-head to facilitate rapid fixing of test specimen
• Continuous roll autographic recorder supplied as standard to enable study of the behavior of materials
• High reading accuracy due to large size design of dial
• Large effective clearance between columns enables testing of standard specimens as well as structures
• Easy change from plain to threaded and screwed specimens
• Robust Straining frame of an extremely rigid construction
• Fully enclosed and protected pendulum
• Simple controls for ease of operation
• Safe operation ensured by means of safety devices
• Wide range of standard and special accessories, including load stabilizer
• Manufacturing With A Capacity From 10 Tons To 500 Tons
• Available In Dial Gauge, Digital & Computerized Models

Product Details:

Often, existing concrete structures will need to be examined and tested to ensure the concrete remains of adequate strength and durability. Rebound hammer surveys can be conducted to provide a rough estimate of concrete strength, where it is not possible to determine this by more accurate means such as core extraction and testing. The test involves using a special rebound hammer, which measures the recoil of a piston against the concrete surface when a standard force is applied. This recoil can then be correlated approximately to concrete strength.

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer),D/P,D/A

Product Details:

Product Description: The Plate Load Testing Apparatus provided by us are known for their excellent load bearing capacity.

Features:

• Simple design
• Smooth operation
• Greater accuracy
• Good load bearing strength
• Precision designed
• Sturdy built

Product Details:

We are manufacturer & supplier of Curing Tank from Mumbai, India.

Product Details:

• 24 Hour cycle from time of mixing.
• Controlled 35oC or 100oC ±2oC Curing Temperature for concrete.
• Controlled 27oC ± 2oC Curing Temperature for grey cement.
• The tank has been designed to accommodate 150mm/70.6mm
• cube mould upto 36/72 cube mould and fully insulated, complete with a hinged lid, heater, thermostat and re-circulated pump.
• Provision of two removable racks allowing free circulation of water around each mould. The pump, drain valves and electrical equipment are housed in a compartment located at one end of the tank
• The Tank is heated by a immersion heater under normal conditions and refrigeration system for grey cement the temperature is controlled at 35oC or 100oC ± 2oC / 27oC +2oC, expect for the 15 minutes after immersion of the freshly made specimens
• Salient Features Curing Tank for 6/12 moulds of 150mm/70.6mm size Curing Tank for 12/24 mould of 150mm/70.6mm size

Specifications:

• Temperature Control Type: Automatic
• Max Control Time: 9999 min
• Heat Power: 10 kW
• Power: AC380V, 50Hz

Product Details:

Advanced Technocracy Inc. is Manufacturer, Exporter & Supplier of Vicat Apparatus in all over india leading supleyer shreeji instrument

Specifications: VICAT NEEDLE TEST APP 

• The procedure, as recommended in various standards, is for determining the quantity of water required to produce a cement paste of standard consistency
• The apparatus includes one of each:
• Vicat Mould
• Glass Base Plate
• Initial Needle (in Plastic Case)
• Final Needle (in Plastic Case)
• Consistency Plunger (in Plastic Case)
• Mild Steel Base Plate
• Vicat Method, Split Type, with Clamping Ring

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer),D/P,D/A

Product Details:

We are manufacturer, supplier and exporter of Compaction Factor Apparatus as per IS:5515 from Mumbai, India. Compaction Factor Instruments that we offer, is complete with hoppers and receiver assembly. Our Compaction Factor Apparatus is built on a rigid and stable frame and consists of two conical hoppers, each with a hinged trap door. Trap door of our Apparatus is operated by a quick release mechanism to allow a free fall to the released concrete mix sample. A cylindrical mould is fitted beneath the two hoppers. Hoppers and receiver of this Compaction Apparatus can be easily removed for cleaning.

Specifications:

• Power: Manual
• Material: cast iron
• key words: VEBE test, consistometer
• Testing method: Flow quantity in certain time

Product Details:

We offer a wide range of very high quality Cone Penetrometer at a very affordable price. These products are manufactured using very high quality raw materials that are sourced from very reliable vendors. These products undergo various sets of quality testing at each level of its production to ensure superior quality and flawless performances. We believe in effective and timely delivery of product once ordered by our clients.

Features:

• Dimensional accuracy and compact size
• Durable and long lasting performances
• International quality
• Reasonable price

 

Specifications:

 

• Liquid limit falls below 25
• Plasticity index between 4 and 7
• It meets the requirements of IS-2720 Part V

Product Details:

We offer Vicat needle apparatus, which are used for determining the normal consistency and setting times of cement and ''''A'''' Class limes. Further, our range consists of a metallic frame bearing a freely movable rod with a cap at top, one vicat mold, split type and glass base plate and one set of needles one each initial needle, final needle and consistency plunger.

Features :

• Consists of a handling system and 6 measuring stations
• Equipped with a drop rod with frictionless electronic measuring system
• Tests can be performed in air or under water
• Process control and test result evaluation through PC

Advantages:

• Automatic organized test data storage
• Cleaning and drying of needle for test accuracy
• Automatic detection of initial and final set time
• Fully independent chambers
• User-friendly programming
• Easy test setup and control
• Definable penetration schematic
• Robust

Specifications:

• Weight: 6Kg
• Usage: Cement test
• Weight: 300g±1g
• Length: 50mm±1mm

 

Product Details:

An entertainment of air in limited percentage improves durability of concrete and very low percentages deteriorate it, measurement of air entrapped in freshly mixed concrete becomes important. The use of chemical additives to increase workability of concrete requires an air content check to be made. Air Entertainment Meters are used to determine air entertained in freshly mixed concrete by pressure method.

 

Specifications:

 

• The apparatus consists of a pressure tight flanged cylindrical measuring bowl of 0.005 cubic meter capacity for maximum size of aggregate 38 mm
• The bowl is fitted with a removable flanged conical cover assembly with the help of a seal
• The conical cover has an air valve and a pet cock for bleeding off the water
• A transparent cylindrical stand pipe which is graduated in air content is fixed to the conical cover assembly
• Pressure is applied to the specimen with the help of a pressure bulb and the pressure is recorded on the pressure gauge, which is mounted on the stand pipe
• The whole assembly is mounted on a flat base
• The instrument is supplied complete with one each following accessories$
• Calibration cylinder with spring clamp, trowel, tamping rod, straight edge, rubber mallet and measure