Bitumen Testing Equipments

Product Details:

We are passionately engaged in providing a wide assortment of Softening Point Apparatus. Used to determine softening point, the offered softening point apparatus is manufactured by making use of high grade material and leading technology in compliance with the set norms of industry. We offer this softening point apparatus on number of specifications as per the variegated needs of customers. Our offered softening point apparatus is packed with quality material to enhance its life.

Features:

• High efficiency
• Supplied with a glass beaker
• Longer service life

Specifications:

 

• The apparatus consists of steel bracket with a sliding plate support
• The support has two holes of 10 mm dia on which a ring and ball guide can be kept
• A central hole on this plate is for inserting thermometer
• Supplied with a glass beaker approximate 8.5 cm. I.D., 12 cm high and a hand stirrer and 2 nos. 9.5 mm dia steel balls
• Bituminous material loaded by a 9.5mm dia steel ball drops at a distance of 25mm

 

Ring And Ball Apparatus (Electrical):

 

• Same as above but supplied with a thermostatic hot plate. suitable for operation of 230 V A.C.

 

Accessories:

 

• Thermometer IP 60C range 2ºC to 80ºC, thermometer IP 61C range 30ºC to 300ºC x 5ºC
• Electrical stirrer with stand & blades to gently stir water in the beaker
• Suitable for operation on 230V AC

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer),D/P,D/A

Product Details:

Used for the measurement of resistance to plastic flow of cylindrical specimens of bituminous paving mixtures when tested in a marshal load frame. Test specimens are produced and tested at a speed of 50.8mm/min.The maximum load (stability) and deformation (flow) of the specimen are recorded. Generally the test is applicable to hot mix designs using bitumen and aggregate of maximum size of 25mm. Widely used for designing and evaluating bituminous paving mixes.

Product Details:

With the inclusion of modern techniques, we are engaged in offering Ductility Testing Apparatus. This testing apparatus consists of a water bath with a thermostatic heater and a circulating pump in order to maintain uniform water temperature. Our offered testing apparatus is checked on numerous parameters before supplying in the market. Customers can avail the offered testing apparatus from us in various specifications as per their requirements.


Features:

• Excellent performance
• Low operating cost
• Easy installation

Product Details:

Flash & Fire Point Apparatus used for determining the flash point of fuel oils and lubricating oil, bitumen other than cutback bitumen and suspension of solids in liquids, having a flash point above 49°C. The apparatus consists of brass test cup with handle removable cup cover with the spring operated rotated shutter having oil test jet flame device, stirrer with flexible shaft. The assembly rests in air bath which is covered with dome shape metal top. The cup assembly is positioned in a cast iron air bath, fitted with a chrome plated brass top having electric heater with temperature controller. Suitable for operation on 220V, 1Ph, 50Hz AC Supply.

Product Details:

We provide an exclusive range of Laboratory Ovens that are perfectly designed as per the requirements of our esteemed customers. Our laboratory hot air oven is specifically designed for laboratory purposes. Also, our digital hot air oven is manufactured according to needs of prevailing development and research industry. Our product range of laboratory hot air oven has characteristic features like long life, air ventilation, low maintenance, energy efficient etc.


Features:

• Air Ventilation
• Ergonomic Design
• Versatile Usage
• Energy Efficient
• Long Life
• Low maintenance

Bottom Headed:

• These are designed to destroy bacteria, virus, fungus, in sterilized surgical instruments, glass wares by application of dry heat with temperature ranging between 500C - 2500C with an accuracy of +/- 10C

Construction:

• Double walled chamber, inner made of Alu/ S.S outer made of M.S sheet, with standard painted.
• The gap between the two walls are filled with glass wool for proper insulation, imported heater, temperature controller, rotary switch, On/ Off switch and thermostat

Product Details:

A boon to pharmaceutical and petroleum industries oil refineries and universities etc. Raagaa constant temp. water baths are meant primarily for viscosity determination of liquid. Fully automatic with performance accuracy better than  ± 0.01à & °C. Backed by efficient indigenous technology having a based proportional digital indicating controller with PT100 sensor system, we are capable of providing our products at market leading prices. External circulation facilities at highly stable temperatures have also been made available. It can also be applied in general laboratory routine tests kinetic studies and so on in universities educational institutions.

The working chamber made out of selected grade thick brass SS sheet heavily nickel plated to withstand corrosion is mounted in a pressed aluminum cabinet with proper air gaps to avoid heat losses due to conduction. The inner tank is with toughened glasses mounted on silicone rubber gaskets. The exterior cabinet is properly recessed to accommodate outer glasses to minimize transfer of heat to the bath media. The circulation stirrer unit accommodated near the heaters in a separate compartment separated by a wire arrangement make the bath obstruction free for use. The control devices are suitably mounted to withstand heat etc.

Product Details:

We are actively engaged in offering a quality assured assortment of Bitumen Testing Apparatus. The offered testing apparatus is designed keeping in mind the standards of market using excellent quality of material. This testing apparatus is used for mixing of bitumen for making different types of test specimens in the laboratory. Customers can easily avail this testing apparatus from us in a confine time at nominal rates.

Features:

• Sturdy construction
• Perfect reading
• Long working life

Other Details:

• A motor driven mixer which simultaneously imparts two motions to the mixing paddle i.e. revolving and planetary
• A two speed gearbox is incorporated in the drive which makes the paddle revolve at approximately 140 and 285rpm with corresponding planetary motion of 62 and 125rpm respectively
• A stainless steel mixing paddle of the specified shape and dimension can be attached or removed easily
• A stainless steel mixing bowl of about 6 ltr capacity fitted with heating jacket for heating of sample at the bottom of bowl with the thermostat controller
• The mixing bowl can be held with the mixing apparatus and its height is adjustable

Additional Information:

• Port of Dispatch: Ahmedabad, India
• Delivery Time: As per the Order
• Packaging Details: Export Packing (As per the Suitable in Air/Shipping/Cargo Consignment)

Also called Softening Point Apparatus. This apparatus is meant for determination of softening point of bituminous materials according to IP 58 and IS 1205 Softening point is that temp. at which the specimen under test becomes soft enough to allow a steel ball of specific dimension to fall a required distance under test condition. The apparatus consist of Glass beaker of heat resistant glass of internal dia 8.5 cm X 12 cm depth (approx.), Two steel balls each of 9.5mm dia, Two tapered brass rings, Two ball guides, ring stand and a hand stirrer. Hand Operated.

Specifications:

• Measurment temperature accuracy: ±01ºC
• Automatically increase of temperature per minute: 5ºC
• Timer accuracy: 1S
• Steel ball weight: 350±005g, diameter: 950mm
• Tempurature display: 002ºC
• Water in the beaker is agitated by magnetic stirrer
• The test is performed in duplicate under closely
• controlled conditions
• Temperature control: Water is used as the bath
• medium for binders with softening points below 80oC
• Above this temperature glycerol is used in place of water

Marsh Cone with Stand The marsh funnel viscosity respectively the funnel flow time is the ratio of the speed of the sample fluid as it passes through the orifice to the amount of force that is causing the fluid to flow. The marsh funnel viscosity is reported as the number of seconds required for 1000 cm³ of sample fluid to flow out of a full marsh funnel.

Being a quality-oriented organization, we are engaged in providing a wide array of Standard Penetrometer. Used to determine grade of bitumen, offered standard penetrometer is manufactured by our professionals utilizing high grade factor inputs & leading techniques in conformity with quality standards. The standard penetrometer consists of a vertical pillar mounted on a base provided with leveling screws. Also, clients can avail this standard penetrometer from us at market prices.

Specifications:

• It consists of a vertical pillar mounted on a base provided with levelling screws
• The head, together with dial plunger rod and cone (or needle) slides on a pillar and can be clamped at any desired height
• A rack & pinion and pointer assemble provides fine adjustment of needle or cone tip to sample
• It incorporates a clutch mechanism which makes reading of penetration and subsequent resetting a simple and accurate operation
• The dial is graduated in 400 1/10 and the millimeter sub-divisions and the needle pointer against figures makes easy reading
• Supplied with bitumen penetration needle, ring weight one each 50 gms and two sample container

Features:

• Superior performance
• Incorporates a clutch mechanism
• Durability

Accessories:

• Penetration cone for empirical estimation of penetration of lubricating grease and petroleum jelly

Automatic Standard Penetrometer:

• Supplied with transistorized timer and electro magnet incorporated in the clutch mechanism to accurately control penetration time to exact five seconds

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer),D/P,D/A

Product Details:

With an aim to stand tall on the expectations of our esteemed clients, we are dedicatedly involved in offering Standard Tar Viscometer. The offered viscometer is designed keeping in mind the standards of market using excellent quality of material. This viscometer is used for testing and measuring purposes in research institutes, laboratories and industries. Customers can easily avail this viscometer from us in a confine time at nominal rates.

Features:

 

• Excellent functionality
• Sturdy construction
• High performance

 

Specifications:

 

• Product group (s): Bitumen & viscosity

• User group (s): Bitumen, road research, tar & viscosity

 

Scope:

 

• To measure the viscosity by determining the efflux time of a warm sample, through a 10 or 4 mm orifice

• Suitable for road tars, cutback asphalts and high-viscous bitumen emulsions with efflux times in the range of 15 to 500 sec

• Single-place unit

• Electrically heated

• Test cups with different orifices

Our clients can avail from us Benkleman Beams that are widely acknowledged for their longer functional life, corrosion resistance and dimensional accuracy. Our products are widely used in various industries laboratories and research institutes. Furthermore, these are thoroughly checked by our team of expert quality controllers to ensure flawlessness.

 

Specification:

 

• This device was developed by U.S. bureau of public roads and is used timesaver deflections of flexible pavements.
• The light weight instrument is supplied in two parts for assembling on site with easy hand tools
• In use one end of the beam rests at a point under investigation while the beam is pivoted at the centre
• The free end carries a dial gauge to record the deflections
• The other end is kept on a stable platform
• The beam ratio is 2:1 which magnifies even small deflections
• Supplied with a dial gauge 0.01 x 25 mm
• This is a light weight dismount liable instrument and easy to carry

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer),D/P,D/A

Product Details:

This Equipment is to speed up the process with ease and accuracy to prepare cylindrical specimens for Marshal Stability Testing Machine. The compactor has been designed to simulate hand compaction as described in ASTM D1559. This apparatus automatically compacts the sample and stops after preset number of blows has been completed. The Compactor gives Uniformly and accurately compacted marshal moulds for reliable testing.

Specifications:

• Hammer weight: 4.536Kg(STMJ-1A), 10.21kg(STMJ-2D)
• Height of fall:457.2 mm
• Compaction frequency: 60hit/min
• Diameter of the compaction head: 98.5 mm(STMJ-1A), 149.5 mm(STMJ-2D)
• Specimen size:101.6(dia)×87 mm(STMJ-1A), 152.4 mm(dia)×115 mm(STMJ-2D)
• Direct reading counter: 0-9999 times
• Memory of preset compaction times
• Laminated hardwood block compaction foundation: 457 x 200 x 200 mm
• Voltage: AC220V
• Power: 370W
• Measurement: 1740x510x510mm, weight: 180kg

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer),D/P,D/A

We are engaged in providing our clients with Flow Cups that are procured from the reliable manufacturers of the market. Our products are widely used in various industries and sectors for diverse applications. Furthermore, our products are available in various sizes & designs at most competitive prices to fulfill their exact requirements and demands.

 

Specification:

 

• A simple straight units for determination of consistency of oil, resins, Printing ink and paints
• Flow cup is available in different sizes of jet

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer),D/P,D/A

Product Details:

Specifications:

• Mercury in Glass Type or Alcohol in Glass Type. Yellow Back, German Glass. Temperature range: -10°C to 50° C. Least Count 1°C/0.5°/0.1°C.
• Dial type with 30 cm long stem. Temperature range-10°C to 50°C Least count 1°C.
• Digital Type Complete with 20 or 30 cm long stainless steel sensor. Temperature range: -50°C to 50°C Resolution 0.1°C

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer),D/P,D/A

Product Details:

It is a motor driven mechanical compactor useful for soil compaction into 100mm or 150mm dia moulds. Two sets of rammers are provided, one of 2.6kg. And the other of 4.89 kg arranged for 310mm and 450mm fall respectively. For compaction soil into 150mm dia moulds, 100mm face dia rammers having weight of 4.89Kg is used. Where as for 100mm dia moulds, they are of 50mm dia. The rammer assembly is provided with a ratchet and pawl arrangement to lift it from the top of the soil layer. When the rammer reaches the required height the pawl release the rammer, which falls freely on soil surface. The release mechanism is connected by an arm moving up and down which is connected to a reduction gear coupled to the motor through another arm. An automatic blow counter fitted to the compactor is used to set the number of blows. The base plate of the specimen mould is to be fitted to the rotating base plate of the instrument which makes 1/5th revolution per operation. Operation on 230 volts, 50 cycles, single phase, A.C. supply, Moulds are to be ordered separately.

Specifications:

• Power: 700 W
• Ignition Way: Automatic Digital Ignition
• Printer: Thermo Sensitive Printer
• Testing Method: High Precision Flame Ionization Test
• Trademark: HK
• Specification: 550 × 310 × 400(mm)
• Rated Voltage: AC220V±10%, 50Hz
• Operating Model: LCD Touched Screen